Atmos Vape Pen for Dry Herbs

Vape Kit Includes:

• 1x 650mAh Rechargeable lithium-ion battery
• 1x Ceramic heating chamber
• 1x Spring
• 1x Mesh filter
• 1x Chamber connector
• 1x Ceramic Filter
• 1x Rubber mouthpiece
• 1x Cleaning brush tool
• 1x Packing tool
• 1x USB adapter
• 1x User manual

You've most likely heard of it, but if you haven't, both the AGO and Atmos Rx are popular dry herb and wax vaporizer pens. They are portable, and a convenient solution for combusting and vaporizing on-the-go.

In a matter of minutes you can load, inhale, and enjoy. You can use the vaping device with dry herbs and herbal products or wax concentrates. And because our unit can come with glass screen filters, you can also improve how much vapor you get.

AGO and Atmos Vape Pen Details

Getting the Best Hits From Atmos Rx and AGO

Vaping Dry Herbs

To create vapor with dry herbs, you'll need to make use of the glass screen filters included with your order:

1. Place 1-3 glass screens directly onto the heating coil (works best with 2 or 3). We also recommend removing the spring from the mouthpiece.
2. Grind your herbs and place a pinch or two onto the glass screen (check out the grinder available at our site)
3. If you're using just 1 glass screen: Begin heating the chamber and start slowly inhaling almost immediately. If you wait too long, you may combust.
4. If using 2-3 glass screens, you'll lessen the risk of combustion, but it increases how long you must heat the chamber.
5. Continuously heat the chamber for 10-20 seconds. You must bypass your battery's automatic shut-off (which occurs after about 7 seconds) by releasing the power button just before the battery shuts off, then rapidly press and hold it again
6. After about 15 seconds, slowly inhale. You should inhale vapor (which you can taste and see when exhaling)
7. If you produce combusted smoke, try using more glass screens or powering the device for less time
8. If you don't produce any vapor, try using less glass screens or powering the device for longer
9. For help, check out the tutorial video below

Glass screen vape tutorial

Detailed written guide to using glass screen filters with vape pens

Combusting Dry Herb

1. For the best results, finely grind your herbs--check out the grinders at our site
2. We recommend you remove the spring from the mouthpiece by taking off the rubber, pushing out the spring, then replacing the rubber
3. Pack a modest amount of dry herbs into the chamber (heating element). Try not to overpack, or you will disrupt the airflow and overwhelm the heating coil, which reduces your hits. The less you pack, the bigger the hits. Trust us.
4. Press and hold the power button. Wait for about 3 seconds to let the heating coils get hot. Then, slowly inhale.
5. It may help to tap the side of the chamber in between hits to shuffle non-combusted herbs onto the coil.
6. Remember, the most important part is to pack a modest amount. Over-packing will overwhelm the coils.

Vaping Wax Concentrates

1. Place a small amount of your wax concentrate inside the heating chamber, directly onto the coil. The more solid the wax, the better. Try to avoid excessively gooey oils.
2. Press the power button to heat up the coil
3. The hot coil will melt the wax into oil and vaporize it
4. Inhale slowly and Enjoy!

Better Battery Capacity

Forget mAh--here's what those numbers actually amount to:

345 puffs (powering for 3 seconds each)

17 minutes and 15 seconds of continuous power on full charge (2x Jr.)

115 complete, 9-second powering sessions (device pauses after 9 seconds)

High quality heating coils

All vape coils get replaced eventually. But take decent care of the Atmos and AGO vape coils and they can last!

Product Video

Related Blog Posts

• Who is Atmos?
• Differences between Atmos Vaporizers
• Which Vape Pen for Wax and Dry Herb is the Best?
• Atmos Rx review