G Pen Connect E-Nail Kit Includes 
  • Free USA Shipping - Signature, Priority, and Worldwide Shipping options are also available. 
  • 1x G Pen Connect Battery 
  • 1x G Pen Connect Tank 
  • 1x G Pen Connect Housing 
  • 1x G Pen Connect Glass Male Adapter (14mm)
  • 1x G Pen Connect Male Glass Adapter Connecter 
  • 1x Micro USB TO USB Charging Cable 
  • 3x Replacement O-Rings 
  • 1x G Pen Connect Travel Case 
Features and Specifications 
  • Vaporizes Wax Concentrates Only 
  • Magnetic Tank Cap helps conceal the wax concentrates 
  • The heating element is made of high-quality ceramic 
  • Vape Battery Capacity is 850mAh
  • Battery has Three Variable Voltage Settings (Blue 3.1V, Green 3.6V, and  Red 4.1V)
  • The Spring-loaded carb release allows you to effectively clear the chamber 
  • The glass adapter connects to any water pipe with glass to glass connection. 
  • Easy To Use 
  • Travel Friendly 
Frequently Asked Questions

How To Use a G Pen Connect E-Nail? 

  1. Register the serial number that's located at the bottom of the packaging on G Pen's website. 
  2. Use the Micro USB port to fully charge the G Pen Connect Battery 
  3. The button LED will flash red while charging. It will turn green after it's fully charged. You will know that the battery needs charging if the red led light blinks 8 times. If there is an improper tank connection or short circuit, the led will blink 3 times.  
  4. Twist the G Pen Connect tank into the top of the G Pen Connect Adapter fully. 
  5. Twist G Pen Connect Male Adapter into the bottom of the G Pen Connect Adapter fully. 
  6. Insert the G Pen Connect Device into the female joint of a water pipe 
  7. Remove the lid of the G Pen Connect Vape Tank. Use a dab tool to load your wax concentrates into the chamber. If you have already heated this tank consecutive times, DO NOT REMOVE THE LID until it has cooled down. 
  8. Attach the G Pen Connect battery from the circular connection point of the battery on the matching circular plate on the side of the G Pen Connect tank. They will magnetically connect immediately. 
  9. Press the G Pen Connect Battery Button 5 times consecutively to turn the device on or off. 
  10. To change the voltage of the battery, press the power button 3 times. The blue light means the battery is set at 3.1 volts. The green light means the vape battery is set at 3.6 volts. The Red light means the battery is set at 4.1 volts. 
  11. Press the button two times to start the automatic heat activation. The button will flash for 5 seconds, indicating that it's heating up. Then the button will stay a solid color for an additional 10 seconds to indicate it's time to begin inhaling at the maximum heat output. You can press the button at any time to cancel heat activation. 
  12. You can also press and hold the power button for manual heat activation. A manual heating session can last up to 15 seconds. Then a safety auto-shutoff will happen. 
  13. While you are inhaling, press the side carburetor button to clear out the rest of your wax dab. 

How To Clean a G Pen Connect E-Nail?

  • You do not need to clean this device. If you want to clear out the wax tank, the best way to do it is by burning off the residual wax. DO NOT USE any kind of cleaning agent or water to clean the inside of the device. 
  • If the outside of the battery is dirty, you can use a paper towel to wipe off debris. The glass adapters could be cleaned using a cleaning agent or isopropyl alcohol. 

Why Buy a G Pen Connect E-Nail?

  • The G Pen Connect E-Nail is one of the most unique devices on the market. You can attach it to almost any dab rig and dab on the go with your friends. The case makes the G Pen device that much more travel friendly. Get one of the best dabbing accessories on the market today and you won't be disappointed. 
Reviews ( )

G Pen Connect E-Nail

Notify me when this product is available:

The G Pen Connect is one of the most innovative dabbing devices on the market. It's essentially a battery operated e-nail attachment that allows you to attach it to any bong or dab rig. The variable voltage battery takes a few seconds to heat up and you can begin taking huge dab hits. It's super small and very easy to use. Get this dab rig accessory today and show it off to your friends. 


G Pen Connect E-Nail Kit Includes 
  • Free USA Shipping - Signature, Priority, and Worldwide Shipping options are also available. 
  • 1x G Pen Connect Battery 
  • 1x G Pen Connect Tank 
  • 1x G Pen Connect Housing 
  • 1x G Pen Connect Glass Male Adapter (14mm)
  • 1x G Pen Connect Male Glass Adapter Connecter 
  • 1x Micro USB TO USB Charging Cable 
  • 3x Replacement O-Rings 
  • 1x G Pen Connect Travel Case 
Features and Specifications 
  • Vaporizes Wax Concentrates Only 
  • Magnetic Tank Cap helps conceal the wax concentrates 
  • The heating element is made of high-quality ceramic 
  • Vape Battery Capacity is 850mAh
  • Battery has Three Variable Voltage Settings (Blue 3.1V, Green 3.6V, and  Red 4.1V)
  • The Spring-loaded carb release allows you to effectively clear the chamber 
  • The glass adapter connects to any water pipe with glass to glass connection. 
  • Easy To Use 
  • Travel Friendly 
Frequently Asked Questions

How To Use a G Pen Connect E-Nail? 

  1. Register the serial number that's located at the bottom of the packaging on G Pen's website. 
  2. Use the Micro USB port to fully charge the G Pen Connect Battery 
  3. The button LED will flash red while charging. It will turn green after it's fully charged. You will know that the battery needs charging if the red led light blinks 8 times. If there is an improper tank connection or short circuit, the led will blink 3 times.  
  4. Twist the G Pen Connect tank into the top of the G Pen Connect Adapter fully. 
  5. Twist G Pen Connect Male Adapter into the bottom of the G Pen Connect Adapter fully. 
  6. Insert the G Pen Connect Device into the female joint of a water pipe 
  7. Remove the lid of the G Pen Connect Vape Tank. Use a dab tool to load your wax concentrates into the chamber. If you have already heated this tank consecutive times, DO NOT REMOVE THE LID until it has cooled down. 
  8. Attach the G Pen Connect battery from the circular connection point of the battery on the matching circular plate on the side of the G Pen Connect tank. They will magnetically connect immediately. 
  9. Press the G Pen Connect Battery Button 5 times consecutively to turn the device on or off. 
  10. To change the voltage of the battery, press the power button 3 times. The blue light means the battery is set at 3.1 volts. The green light means the vape battery is set at 3.6 volts. The Red light means the battery is set at 4.1 volts. 
  11. Press the button two times to start the automatic heat activation. The button will flash for 5 seconds, indicating that it's heating up. Then the button will stay a solid color for an additional 10 seconds to indicate it's time to begin inhaling at the maximum heat output. You can press the button at any time to cancel heat activation. 
  12. You can also press and hold the power button for manual heat activation. A manual heating session can last up to 15 seconds. Then a safety auto-shutoff will happen. 
  13. While you are inhaling, press the side carburetor button to clear out the rest of your wax dab. 

How To Clean a G Pen Connect E-Nail?

  • You do not need to clean this device. If you want to clear out the wax tank, the best way to do it is by burning off the residual wax. DO NOT USE any kind of cleaning agent or water to clean the inside of the device. 
  • If the outside of the battery is dirty, you can use a paper towel to wipe off debris. The glass adapters could be cleaned using a cleaning agent or isopropyl alcohol. 

Why Buy a G Pen Connect E-Nail?

  • The G Pen Connect E-Nail is one of the most unique devices on the market. You can attach it to almost any dab rig and dab on the go with your friends. The case makes the G Pen device that much more travel friendly. Get one of the best dabbing accessories on the market today and you won't be disappointed. 
Reviews ( )

Subscribe