SteamCloud Mini 2.0 Vape Tips and Tricks
The SteamCloud Mini 2.0 is one of the hottest cartridge vaporizers on the market today. It offers a wide range of compatibility with different materials and a few features that make it a top choice in its price point. That said, if you own a SteamCloud Mini 2.0 or if you are planning to buy one, here are some tips and tricks that can help you get the most out of your sessions with the SteamCloud Mini 2.0 vape pen.
Let’s begin.
Fully charge Vape Battery before use
The SteamCloud Mini 2.0 will come partially charged right out of the box. However, it is encouraged that you fully charge your battery before using it especially if you will be heading out and about. This is so you can be sure that the SteamCloud Mini 2.0 will not die on you when you use it. Furthermore, pre-charging the battery once you receive it allows the SteamCloud Mini 2.0 to start a calibration process. This will let your vaporizer know exactly how your new battery behaves. Doing so can help you in preventing inconsistencies in terms of battery life and charging time making your SteamCloud Mini 2.0 more reliable.
Use the battery charging cable that came with the device when you have pulled it out of the box to ensure that it follows the specifications that the battery has been built with. Avoid using wall adapters that are used for larger devices with higher battery capacities as constant exposure to high power voltages can damage the battery overtime. If you are unsure, use the USB ports in your desktop or laptop computer as the voltage levels they release are low enough to damage the battery but high enough to put out a charge.
Do not overtighten the metal rings
The SteamCloud Mini 2.0 uses magnetic metal rings to bridge the connection between the battery and the 510-threaded cartridge common with dry herb vaporizers. Before this technology was applied to most vape batteries, you will have to manually screw the 510 carts directly on the battery. And while this may offer a stable platform for your cartridges, the threading on the battery may loosen overtime especially if you are not careful. The use of the magnetic rings allows you to conveniently slide your cartridges inside and out of the chamber. However, in some cases, the battery may fail to read the carts. This happens because either the carts are too loose or too tight. Make sure you give it a right fit and avoid over tightening when you feel some resistance in your hands. It is also one way of troubleshooting the SteamCloud Mini 2.0 when the cartridges are not firing. Just loosen the carts just enough that it does not dangle out of the metallic magnetic ring. You may also wipe the metal contacts to ensure that the battery delivers the right amount of power to the cartridge.
Preheat your oils
This includes your wax concentrates as well as preheating extracts can prepare them for fast vaporization. When you enter pre-heat mode, the SteamCloud Mini 2.0 will heat your wax concentrates and oils at a low voltage level of 1.8 volts. This is enough to melt any hardened oil or wax concentrates but weak enough to activate any of the cannabinoids from your extracts. So, if you are worried about having a weaker hit or getting less potent vapors, SteamCloud Mini 2.0’s pre-heat mode will not affect the quality of your materials. What it does instead is it unclogs the air-path of the cartridges promoting better airflow during sessions. Moreover, it ensures that your wax concentrates and essential oils will immediately vaporize, and you will not have to wait for several seconds before you reap its benefits. The pre-heat mode will only run at an average of 15 seconds to prepare your materials for vaporization. It is a helpful feature if you need fast results from your vaporizer or if you are using the SteamCloud Mini 2.0 in a cold environment.
Use different carts for a better experience
The SteamCloud Mini 2.0 can be compatible with a wide variety of materials including wax concentrates, dry herb strains, and oils. Each of these material types go in specific cartridges allowing you to experience three vaporizers for the value of one. This lets you enjoy different materials without having to buy different vaporizers for each of them. You can preload the cartridges so you can swap them out anytime if you are going to use them on-the-go. Just make sure to keep the cartridges upright as the materials can spill especially if you are using viscous oils. Nevertheless, you can maximize your investment by using the SteamCloud Mini 2.0’s capability to the fullest.
Use the different temperature settings for best results
The SteamCloud Mini 2.0 is outfitted with different temperature levels and you need to know how to regulate temperature so you can enjoy the different effects from different materials. The lower temperature level is good for getting thin but flavorful and aromatic clouds while the highest temperature level can boost and intensify the potency of your materials. The middle temperature, on the other hand, gives you an ideal balance between the two aforementioned effects.
If you plan to enjoy sessions that can help you relax and calm down, the lower temperature levels are a great place to start. At the same time, if you want to experience potent sessions that knock you off your socks, using the higher temperature range will give you the kind of affects you want. If you need anything to help you get deep sleep or a mood booster, the middle temperature setting would be your go to.
Mini Vape Takeaways
The SteamCloud Mini 2.0 is a great device to use whether you are consuming your favorite materials for recreational or for medical purposes. These tips can help you maximize your experience and use the SteamCloud Mini 2.0 to its full advantage. We hope that with these tips, you get to use your vaporizer like a pro.
Related Blog Posts
STEAMCLOUD VAPES: WHY YOU WILL LOVE THEM AND THEIR PRODUCTS