The Yocan Pandon is one of the newest vape pens in the market. It comes with two high-quality heating chambers with dual quartz rods in each chamber. Not only does this vape pen have the best quartz coils around, but the voltage is adjustable and the battery capacity is 1300mah. This vape pen is very small and portable too.
SPECIAL NOTE ABOUT YOCAN PANDON
The Yocan company has discontinued the Pandon and it will no longer be produce. Vape pens similar to the Pandon would be the Yocan Evolve Plus Xl, the Magneto, or any of the other Yocan wax vape pens still available.
Yocan Pandon Vape Kit Includes
- 1x Pandon Wax Vape Pen
- 1x Wax Dab Tool
- 1x Micro USB Vape Charger
- choice of add-on options
Yocan Pandon Vape Details
- 1300mah Vape Battery
- Quad Coil uses two dual quartz rod vape coils
- Quad Coil Resistance - 0.8ohm
- Low / Medium / High / Voltage Settings - 3.5 / 3.8 / 4.2 Watts
- TEN second shut-off time
- Vape Pen heats instantly
- Coils are compatible with the Yocan Evolve
Yocan Pandon Vaporizer FAQ
How to use the Yocan Pandon?
- Press the power button 5 times consecutively to turn the power ON/OFF. The power button will blink 3 times after you turn the vape on or off.
- When your vape pen is turned on, you can adjust the voltage by pressing the power button two times quickly.
- If there is none or one atomizer connected, the vape pen will still work. Keep in mind that you do not have to have both atomizers connected to use the Yocan Pandon wax vape. If you press and hold down the power button, the light on the button will stay on for as long as 10 seconds.
- White Light - 4.2 / Blue Light - 3.8 / Green Light - 3.5
- After you've set the voltage, make sure to test the vape pen so you know the coils are screwed in properly and work.
- Then fill either one or two of your heating chambers with shatter, crumble or other wax concentrates.
- After filling your vape coils with wax, all you need to do is press and hold down the power button and begin vaping. Keep in mind that after 10 seconds, the heat mode will automatically shut off and the power button will blink 3 times.
How to Charge the Yocan Pandon?
- When the Yocan Pandon wax vape battery is dead, the power button will blink 10 times.
- First plug the USB into a power source such as a computer, laptop, AC wall adapter, car charger, etc. Plug the other side of the cable into the Pandon vape battery.
- While the Yocan Pandon vape pen is charging, the LED light will stay green.
- The green light will then turn off after the vape battery is fully charged. Charging time typically takes up to 2.5 hours.
How to clean Yocan Pandon Vape?
- It is not very easy to clean your Yocan Pandon vape pen. After you've vaped all of the shatter and crumble, you need to unscrew the coil caps and keep turning the vape pen on for 10 seconds. That way the coil can burn off as much residue as possible. Some people also use a Q-Tip, BUT BE CAREFUL!!! The last thing you want is to get cotton STUCK IN THE VAPE COILS.
Which Vape parts get replaced?
- The only vape parts that need to be replaced for the Yocan Pandon vape pen is the vape coils. These wax coils are compatible with the Yocan Evolve too. Customers generally purchase 5x Evolve Coils if they want to have extra coils. For the daily user, coils can last for several months if you take care of your vape pen. The key is to make sure that you aren't allowing residue to build up over time.
The ideal voltage setting on Pandon?
- That is a very difficult question. Some people like to burn their shatter or crumble at the highest possible temperature. Then there are others that want to set the voltage at the lowest level so that the vapor is less harsh on your throat. We always say it depends on the person. If you have time to leave a review, let us know what your preferred voltage setting is so that new customers can see what others are saying and not just listening to Vape Vet Store.
Why Vape Blinks 3x After Pressing Power Button
- When the Yocan Pandon blinks 3 times after pressing the power button, it means that there's a short circuit issue. Short circuit issues are very rare, but if in the event that it happens, there are some things you could do to quickly identify the problem.
- First, you want to make sure that the connection point between the vape coil and battery are clean and free of debris. If you still experiencing the 3 blinks, then the next thing to try is using a tweezer to lift up the pin on the battery. After frequently using your coils and over-tightening them, the pin on the battery could be pushed down, which makes the connection weaker.
- If you are still experiencing the 3 blinks, try using other coils with the battery. If other coils work, then it's clear you have a defective coil. If all of the coils don't work, then it's clear you have a battery issue.
- Most short circuit issues are because of a defective atomizer. It's either the atomizer's electric pole component or it is the coil wiring behind the connection pin. If the coil wires touch each other at any point, the coil won't work and it cannot be fixed.
- Once you've identified the problem, please send a video to our support team so we can confirm the issue and help resolve things as soon as possible.
Why buy the Yocan Pandon Wax Vaporizer?
- This adjustable temperature wax pen has it all. It's got two qual quartz coils for quick heating and has a large battery for lots of vape time. It's super easy to use, portable and the vapors it produces are delicious. If you want to learn more about the Pandon, head over to the Vaporizer Learning Center to check out the review.