The Yocan iShred is one of the most unique portable dry herb vaporizer products in the market. It comes with a built-in herb grinder and kief catcher so you can shred and vape with one device. The other really cool feature is the tool inside the mouthpiece that helps stir the dry herbs while you're in the middle of vaping. This is definitely the vape to get if you're looking for the most portable vaporizer out there.
Yocan iShred Vape Kit Includes
- 1x Yocan iShred Dry Herb Vaporizer
- 1x Cleaning Brush
- 1x Micro USB vape charger Cable
- 1x iShred Vape Instruction Manual
Add-On Option Details
- iShred Vape Kit + Herb Grinder - Included with this vape kit is a silver 4 piece herb grinder.
Yocan iShred Vape Details
- Dry Herb Vaporizer - the Yocan iShred Vaporizer is meant for use with dry herbs only
- Built in Herb Grinder and Kief Catcher
- Built in Tool inside the Mouthpiece that can stir the dry herbs in the heating chamber.
- Superbly Diffused Airflow
- 100% Ceramic Heating Chamber
- 5-minute safety shut-off
- OLED Vape Screen Display
- Micro USB Vape Charging ability
- Vape Battery Capacity: 2600mah
- Temp Control: 200-460F
- Size: 145mm x 25mm
Yocan iShred Vape FAQ
How to use Yocan iShred Dry Herb Vaporizer
- Power On: Press the power button 5 times consecutively to turn the vaporizer on/off. The display screen on the vaporizer will say Yocan when the vape is turned on. The display screen on the vape will say Take Care, when you turn it off.
- Loading Heating Chamber: Use the herb grinder at the bottom of the vaporizer to grind up your dry herbs. After you've ground up the herb material, you can use your fingers or a tiny spoon to start loading the ceramic heating chamber.
- Set Temperature: The default temperature is set at 200 degrees Fahrenheit. Use the up or down buttons to set the desired temperature.
- Turn on the Oven: After you've set the temperature, all you need to do is hold down the power button for 3 seconds. After you let go of the button, the LCD screen will flash and begin heating. When the vaporizer reaches the desired temperature, the LCD screen will stop flashing. Also, if you want to adjust the temperature while the vaporizer is heating, you can adjust using the up or down key. Lastly, from the time the vaporizer starts heating, it will stay on for 5 minutes. You will see a timer counting down from 5 minutes. Afterward, heat mode will automatically turn-off. After heat mode turns off, if you DO NOT press any of the buttons, the screen will shut off after 30 seconds, but the vaporizer device will still be on. If you want to shut off the device, you must press the power button 5 times.
- Stop the Vaporizer from Heating: Hold down the power button for 3 seconds and it'll be set at standby. You can also press the power button 5 times consecutively to turn the vaporizer off.
- Temperature Switchover between Fahrenheit and Celsius: Hold the power button and the up button simultaneously for two seconds and the degree indicator will change.
- Operation Mode Change from Right Hand to Left Hand: Hold down the power button and the down button simultaneously for two seconds and the digital screen will change directions
How to Charge Yocan iShred Vaporizer?
- The battery indicator on the LCD screen tells you how charged the battery is.
- The screen will stop working if the battery is completely dead.
- To start charging, plug the usb into a power source, such as an AC wall adapter, computer, laptop, or car charger.
- To know that the battery is charging properly, you'll see the battery bar on the screen flash to a full battery and then keep looping around.
- The battery bar will stop flashing when it's fully charged.
- Charging the Yocan iShred typically takes up to 3.5 hours to reach a full charge.
How to clean the Yocan iShred vaporizer
- Cleaning the mouthpiece is fairly easy. Every time you finish using your iShred vaporizer, make sure to use a cleaning brush to scrub off the residual dry herbs. You want to make sure your filter screen is cleaned off. Otherwise, there will be more and more buildup and the airflow will be affected.
- Cleaning the heating chamber is fairly easy. After you've finished vaping your dry herbs, take off the mouthpiece. Then stir the dry herbs around with your dab tool. After that, you can turn the vaporizer upside down and all of the dry herbs should fall out. Once everything is out, you can use a cleaning brush to scrub off any remaining residue. Then use a Q-TIP or cotton ball to clean the rest.
What Does No Atomizer Mean?
- This means that the heating chamber is having wire connection issues with the PCB board.