SteamCloud Box Mod

Attachment

The SteamCloud Box Mod Vape is small, discreet, and one of the most versatile vape mods on the market.  It can be used with dry herb, wax and eliquid atomizers.  You may buy the SteamCloud without any attachments for $59.99 or you can buy this mod with extra attachments. See below to learn about your atomizer attachment options:

  • e-liquid tank attachment is the Kamry X6 Plus
  • Wax Atomizer Attachment is the Yocan Cerum 
  • Dry Herb Atomizer Attachment is the Yocan 94F 

SteamCloud Box Mod Vape Kit Includes 

  • FREE USA Shipping - Priority and International Shipping Options Available 
  • 1x SteamCloud Box Mod 
  • 1x USB Charging Cable 
  • 1x Lanyard Necklace for hands-free action 
  • 1x User Manual 
  • 1x Protective Travel Case 
  • 1x Yocan Cerum Wax Atomizer (optional)
  • 1x Kamry X6 Plus E-Liquid Tank (optional)
  • 1x Yocan 94F Dry Herb Atomizer (optional)

Important Note

Most people use eliquid atomizers with their box mod because the watt changing function is important to them.  For dry herb and wax users, the highest wattage you can do is 10 WATTS. As you increase the wattage from 10, you're increasing the chances of burning out the atomizer and making it defective.  

Features and Specifications 

  • The SteamCloud Box Mod can be used with just about any standard 510 atomizer for oils, wax, or dry herbs
  • Battery Capacity - 1600mAh
  • SteamCloud measurements: 54*30*22 mm
  • Working Voltage: 1.8 - 6 Volts
  • Output Power: 5~60 Watts
  • Atomizer Resistance:  0.15~2.5ohm (temperature sensing wire)
  • Temperature Limit:  200°F-600°F / 90°C-300°C

SteamCloud Box Mod Protection Features 

  • High-Temperature Protection - When the temperature is over 70°C while you're vaping, the box mod will stop and the screen will say SUPER SHORT.
  • Low Voltage Protection - If the voltage is set below 3.4 volts, the screen will say LOW BATTERY when you press the power button. When the voltage is lower than 3.0, the battery mark will keep blinking. 
  • Tank Short/Low Resistance - if the tank resistance is >0.05 and <0.10 the screen shows LOW LOAD. If the resistance is <0.05, the screen says ATOMIZER SHORT.
  • The box mod automatically adjusts to the proper voltage - the module has the function of improving voltage automatically when less than 3.4 volts

Frequently Asked Questions 

How do I use the SteamCloud Box Mod?

  • Turning the device ON/OFF - Quickly press the power button at least 5 times to turn the box mod ON. Repeat that same step to turn it OFF. 
  • Adjusting the mode: To change the mode setting on the screen, press and hold the + and - buttons at the same time. To select the mode, press the power button once.
  • Adjusting the Watt: Press the + or - button to adjust the vape battery wattage.

How do I use the Yocan 94F attachment with the SteamCoud Box Mod?

  • Screw the Yocan 94F atomizer to your SteamCloud Box Mod.
  • Turn on your SteamCloud and set the wattage as high as 10.  You can try a lower wattage if you think the vape coil is heating at too high a temperature.  
  • Press and hold down the power button and after 2 seconds, begin inhaling.

How do I use the Yocan Cerum Wax Atomizer with the SteamCloud Box Mod?

  • Screw the Yocan Cerum Wax Atomizer to your SteamCloud Box Mod Vape. 
  • Turn on your SteamCloud by clicking on the power button 5 times consecutively. 
  • Set the wattage as high as 10 watts. You can try a lower wattage if you think the vape coil is heating at too high a temperature. 
  • Press and hold down the power button. After 2 seconds, you may begin vaping. 

How do I use the Zealot Eliquid Tank with the SteamCloud Box Mod?  

  • Screw the Zealot Eliquid Tank to your SteamCloud Box Mod.
  • Turn on your SteamCloud and set the wattage however you like.  You can set it as high as 60 watts, which will help you blow out huge vape clouds.  The lower the wattage, the less clouds you can blow out.
  • Press and hold down the power button and after 2 seconds, begin inhaling.  Make sure the cotton inside the atomizer is wet, otherwise you will take a dry hit and you will have a very uncomfortable cough.

How to Clean the Steamcloud box mod

  • Cleaning your box mod is very easy. All you need is a Q-TIP and rubbing alcohol. Make sure to dip your Q-TIP in the rubbing alcohol and then clean out the 510 thread battery connection part. This is very important because if eliquid/concentrates continue to get inside the port, your vapor quality will gradually diminish.

Why buy the Steamcloud box mod?

  • The SteamCloud Box Mod is a powerful vape mod that can accommodate an assortment of atomizer attachments. From the Yocan 94f to the Cerum, from the Kamry Zealot to the X6, this box mod can vape them all. The 510 threading and the adjustable wattage settings allow you to vape eliquids, herbs, and concentrates the way you want.

Subscribe

Age Verification